Wednesday, December 30, 2009

How to change corolla 1990 valve stem oil seal? easiest way?

luckily, the valve cover isnt hard to take off or gain access too. you may be able to find step by step pics of the process on





http://www.toyotanation.com/forum/forumd鈥?/a>





I have used that site for years to find reliable and accurate information on all types of toyotas.How to change corolla 1990 valve stem oil seal? easiest way?
the easiest way, is get a air compressor and take out the spark plug, screw the tip of the compressor hose into the plug hole, run the compressor up to about 40 to 50 lbs, take off the rocker and then the keepers, that hold the valve, and change the seal. the air from the compressor will keep the valve from dropping down. after you changed the seal, put the keepers back in, then the rocker. after you get the rocker on, then you can release the air. take the air hose out of the plug hole and put the plug back in, adjust the rocker, and install the valve pan.How to change corolla 1990 valve stem oil seal? easiest way?
There really isnt any easy way there just one way. IF you do not have all the tools to do this I wouldnt try.
  • makeup tips
  • No comments:

    Post a Comment