99 yz 125. I am going to replace the fork seals. How much fork oil do i put in to replace the old oil.?

i have a measuring cup that has the oil ratio to gas and on the other side there is other measurments like cc maybe mm and something else.99 yz 125. I am going to replace the fork seals. How much fork oil do i put in to replace the old oil.?
That model has inverted forks (upside down).


The fork oil is measured by height, not quantity.


A shop manual is necessary to learn the proper procedures and specifications for your particular model, to bleed the forks and adjust the oil level.


http://www.motocom.com/motorcycles/


No mechanic can do the job without a manual.





A fork oil level tool is necessary.


http://www.motionpro.com/motorcycle/part鈥?/a>


Also a fork seal driver %26amp; bullet


http://www.motionpro.com/motorcycle/tool鈥?/a>


http://www.motionpro.com/motorcycle/tool鈥?/a>





Video instructions -


http://www.youtube.com/watch?v=Y43k1qFVG鈥?/a>99 yz 125. I am going to replace the fork seals. How much fork oil do i put in to replace the old oil.?
as old as your bike is, it probably need more than just seals,,they will probably start leaking again soon so i recommend sending your forks off for a major internal cleaning/parts replacement.